node-red-contrib-soma-blinds2
NodeRed node for Soma Smart Blinds 2
What is this node ?
This is a node for Node-Red to control Soma smart blinds 2 via Bluetooth (BLE) directly. No bridge or additional hardware/software is necessary.
It is heavily based on the work by @andersonshatch , https://github.com/andersonshatch/soma-ctrl
The SOMA smart shade device needs to be configured with the SOMA app before connecting.
Configuration
Scan for the devices with the scan button. Look for devices with the name S or RISE to identify the id.
Usage
The Node will connect and receive status messages like position, battery or connection
Commands
The Node accepts the following commmands;
- moveTo (0-100)
- moveUp
- moveDown
- stop
- getPosition
- getBattery
- identify
Position
The device will try to move to the exact position but will stop at approximation. Position will be correctly reported.
Changes;
- 0.3.2, stability fixes. Better reconnect performance. Removed config scanning options. Manual input of Bluetooth ID is now required.
- 0.3.1, added getBattery command to instantly retrieve the current battery value
- 0.3.0, Added Charging and panel reporting.
Bluetooth
- Compatible Bluetooth 5.0 Zephyr HCI-USB adapter (you need to add BLUETOOTH_HCI_SOCKET_USB_VID and BLUETOOTH_HCI_SOCKET_USB_PID to the process env)
- Compatible Bluetooth 4.0 USB adapter
Distance is important. Make sure the bluetooth signal is strong enough.
Running without root/sudo (Linux-specific, not always necessary).
Run the following command:
sudo setcap cap_net_raw+eip $(eval readlink -f `which node`)
This grants the node binary cap_net_raw privileges, so it can start/stop BLE advertising.
Note: The above command requires setcap to be installed. It can be installed the following way:
- apt: sudo apt-get install libcap2-bin
- yum: su -c 'yum install libcap2-bin'