Quickstart

This is nodejs implementation of Meiligao protocol (GPRS communication protocol between server & Meitrack) GPS trackers. It supports following trackers: GT30i, GT60, VT300, VT310, VT400.

To start, install this module with command npm install meiligao and see events handling and command execution examples.

meiligao.Server

Designed to handle tracker connections. Accepts timeout option, that is automatically passed to meiligao.Tracker objects.

var meiligao = require('meiligao');
var server = new meiligao.Server({ timeout: 120000 });

Events

connect

Is emitted when tracker establishes connect with meiligao.Server. Parameters:

tracker: meiligao.Tracker object

disconnect

Is emitted when tracker closes connection. Parameters:

tracker: meiligao.Tracker object

Methods

listen

Bind server to the specified port.

Parameter	Type	Description
port	integer	Port number
callback	function	User callback

server.listen(20180, function(error) {
  if (error) throw error;
  console.log('gps server is listening');
});

meiligao.Tracker

Designed to iteract with GPS trackers. Accepts timeout option, (which is passed automatically by meiligao.Server).

var meiligao = require('meiligao');
 
var server = new meiligao.Server({
    timeout: 120000
}).listen(20180, function(error) {
    if (error) throw error;
    console.log('gps server is listening');
});
 
server.on('connect', function(tracker) { 
    console.log('tracker connected!');
});

Events

heartbeat

Heartbeat is 0x00 message sent by tracker over time. You can configure it's interval using tracker.setHeartbeatInterval method.

error

Is emitted when it is not possible to parse tracker's message. Parameters:

Error: object with error descripton
Buffer: unparseable message

packet.in

Is emitted every time message is received from tracker, very useful for debugging. Parameters:

meiligao.Message: message received from tracker

packet.out

Is emitted every time message is passed to tracker, is useful for debugging. Parameters:

meiligao.Message: message sent to tracker

login

Is emitted after tracker sent 0x5000 login request & successful login confirmation 0x4000 was sent back. In fact, login request can not be used for real authentication, it tells that data sent by tracker will be accepted by server. If you need to implement authentication, use tracker.getSnImei method to receive tracker's data & then tracker.disconnect to disconnect non-authenticated trackers.

message

Is emitted every time tracker sends alarm or report. Parameters:

Object with following data:
- type: message type (see Message.types)
- data: parsed result
- raw: raw data

disconnect

Is emitted after connection was closed.

timeout

Is emitted after connection is timed out (timeout can be configured in Tracker options).

Methods

disconnect

Close tracker connection.

var meiligao = require('meiligao');
 
var server = new meiligao.Server().listen(20180, function(error) {
  if (error) throw error;
  console.log('gps server is listening');
});
 
server.on('connect', function(tracker) { 
  tracker.on('disconnect', function() {
    console.log('tracker disconnected');
  })
 
  console.log('tracker connected!');
  tracker.disconnect();
});

requestReport

Request GPS report (internal: track on demand 0x4101)

Parameter	Type	Description
callback	function	User callback

tracker.requestReport(function(err, data) {
  if (err) {
    console.log('REQUEST REPORT ERROR: ', err);
  } else {
    console.log('REQUEST REPORT: ', data);
  }
});

getSnImei

Request serial number & IMEI from tracker (internal: 0x9001).

Parameter	Type	Description
callback	function	User callback

tracker.getSnImei(function(err, data) {
  if (err) {
    console.log('GET SN IMEI ERROR: ', err);
  } else {
    console.log('GET SN IMEI: ', data);
  }
});

resetConfiguration

Revert all settings (except for the password, IP, Port, APN, ID and GPRS interval) back to factory default (internal: 0x4110).

Parameter	Type	Description
callback	function	User callback

tracker.resetConfiguration(function(err, result){
  if (err) {
    console.log('RESET CONFIGURATION ERROR: ', err);
  } else {
    console.log('RESET CONFIGURATION: ', result);
  }
});

rebootGps

Reboot the GPS module of the tracker (internal: 0x4902).

Parameter	Type	Description
callback	function	User callback

tracker.rebootGps(function(err, result){
  if (err) {
    console.log('REBOOT GPS ERROR: ', err);
  } else {
    console.log('REBOOT GPS: ', result);
  }
});

setExtendedSettings

Set extended tracker settings (internal: 0x4108).

Parameter	Type	Default	Description
setting.smsReplyOnCall	boolean	true	Send position report by sms after call is made to the tracker.
setting.useGPRMSFormat	boolean	false	Use NMEA 0183 GPRMC or normal text (for sms only).
setting.hangUpAfter5Rings	boolean	false	Hang up after 5 rings.
setting.enableCallBuzzer	boolean	false	Turn on/off buzzer for the incoming call.
setting.enableLedLights	boolean	true	When is set to false, lights stop flashing when the tracker is working.
setting.alarmPowerOn	boolean	true	Send sms alarm to the authorized phone number for SOS, and a GPRS alarm to the server, when the tracker is turned on.
setting.alarmPowerCut	boolean	false	Send sms alarm to the authorized phone number for SOS when the power of the vehicle tracker is cut.
setting.alarmGpsBlindArea	boolean	false	Send sms alarm when the tracker enters GPS blind area.
callback	function	-	User callback

tracker.setExtendedSettings({
  smsReplyOnCall    : true,
  useGPRMSFormat    : false, // works for sms only
  hangUpAfter5Rings : false,
  enableCallBuzzer  : false,
  enableLedLights   : true,
  alarmPowerOn      : true,
  alarmPowerCut     : false,
  alarmGpsBlindArea : false,
}, function(err, result){
  if (err) {
    console.log('SET EXTENDED SETTINGS ERROR: ', err);
  } else {
    console.log('SET EXTENDED SETTINGS: ', result);
  }
});

setHeartbeatInterval

Sets specified time interval for heartbeat message (internal: 0x5199).

Parameter	Type	Description
interval	integer	Interval in minutes
callback	function	User callback

tracker.setHeartbeatInterval(1, function(err, result){
  if (err) {
    console.log('SET HEARTBEAT INTERVAL ERROR: ', err);
  } else {
    console.log('SET HEARTBEAT INTERVAL: ', result);
  }
});

clearMileage

Delete total mileage (internal: 0x4351).

Parameter	Type	Description
callback	function	User callback

tracker.clearMileage(function(err, result){
  if (err) {
    console.log('CLEAR MILEAGE ERROR: ', err);
  } else {
    console.log('CLEAR MILEAGE: ', result);
  }
});

setPowerDownTimeout

Set inactivity timeout, after which tracker will go to energy saving mode (internal: 0x4126).

Parameter	Type	Description
interval	integer	Interval in minutes, possible values: 0 - 99, 0 disables timeout.
callback	function	User callback

tracker.setPowerDownTimeout(15, function(err, result){
  if (err) {
    console.log('SET POWER DOWN TIMEOUT ERROR: ', err);
  } else {
    console.log('SET POWER DOWN TIMEOUT: ', result);
  }
});

getMemoryReports

Read logged data and returns reports array (high-level wrapper for internal command 0x9016).

Parameter	Type	Description
callback	function	User callback

tracker.getMemoryReports(function(err, reports){
  if (err) {
    console.log('GET MEMORY REPORTS ERROR: ', err);
  } else {
    console.log('GET MEMORY REPORTS: ', reports);
  }
});

setMemoryReportInterval

Set interval for saving coordinates in memory, when internet is not available (internal: 0x4131).

Parameter	Type	Description
interval	integer	Interval in seconds, possible values: 1 - 65535, 0 - disable.
callback	function	User callback

tracker.setMemoryReportInterval(1, function(err, result){
  if (err) {
    console.log('SET MEMORY REPORT INTERVAL ERROR: ', err);
  } else {
    console.log('SET MEMORY REPORT INTERVAL: ', result);
  }
});

clearMemoryReports

Clear reports stored in memory (internal: 0x5503).

Parameter	Type	Description
callback	function	User callback

tracker.clearMemoryReports(function(err, result){
  if (err) {
    console.log('CLEAR MEMORY REPORTS ERROR: ', err);
  } else {
    console.log('CLEAR MEMORY REPORTS: ', result);
  }
});

getAuthorizedPhones

Return authorized phone numbers (internal: 0x9003).

Parameter	Type	Description
callback	function	User callback

tracker.getAuthorizedPhones(function(err, phones){
  if (err) {
    console.log('GET AUTHORIZED PHONES ERROR: ', err);
  } else {
    console.log('GET AUTHORIZED PHONES: ', phones);
  }
});

setAuthorizedPhones

Set authorized phone for sos button, for receiving sms & calls (internal: 0x4103).

Parameter	Type	Description
smsPhone	string	Authorized phone number for receiving sms.
callPhone	string	Authorized phone number for receiving phone call.
callback	function	User callback

tracker.setAuthorizedPhones(79991234567, 79991234567, function(err, result){
  if (err) {
    console.log('SET AUTHORIZED PHONE ERROR: ', err);
  } else {
    console.log('SET AUTHORIZED PHONE: ', result);
  }
});

getReportTimeInterval

Retrieve reporting time interval from tracker, 1 unit = 10 seconds (internal: 0x9002).

Parameter	Type	Description
callback	function	User callback

tracker.getReportTimeInterval(function(err, interval){
  if (err) {
    console.log('GET REPORT TIME INTERVAL ERROR: ', err);
  } else {
    console.log('GET REPORT TIME INTERVAL: ', interval);
  }
});

setReportTimeInterval

Set reporting time interval (internal: 0x4102, 0x5100).

Parameter	Type	Description
interval	integer	Reporting time interval, 1 unit = 10 seconds.
callback	function	User callback

tracker.setReportTimeInterval(2, function(err, result){
  if (err) {
    console.log('SET REPORT TIME INTERVAL ERROR: ', err);
  } else {
    console.log('SET REPORT TIME INTERVAL: ', result);
  }
});

setReportDistanceInterval

Set distance report as per pre-set interval. Sends out alarm when the car is moving and stops sending the report when the car is stationary (internal: 0x4303).

Parameter	Type	Description
meters	integer	Distance interval, is suggested to be set above 300 meters.
callback	function	User callback

tracker.setReportDistanceInterval(300, function(err, result){
  if (err) {
    console.log('SET REPORT DISTANCE INTERVAL ERROR: ', err);
  } else {
    console.log('SET REPORT DISTANCE INTERVAL: ', result);
  }
});

setAlarmSpeeding

Set speeding alarm (internal: 0x4105).

Parameter	Type	Description
limit	integer	Speed limit, 1 unit = 10 kmph.
callback	function	User callback

tracker.setAlarmSpeeding(15, function(err, result){
  if (err) {
    console.log('SET ALARM SPEEDING ERROR: ', err);
  } else {
    console.log('SET ALARM SPEEDING: ', result);
  }
});

setAlarmMovement

Set movement alarm (internal: 0x4106).

Parameter	Type	Description
area	integer	For supported values please see documentation
callback	function	User callback

tracker.setAlarmMovement(0x03, function(err, result){
  if (err) {
    console.log('SET ALARM MOVEMENT ERROR: ', err);
  } else {
    console.log('SET ALARM MOVEMENT: ', result);
  }
});

setAlarmGeofence

Set geo-fence alarm (internal: 0x4302).

Parameter	Type	Description
latitude	number	Center point latitude
longitude	number	Center point longitude
radius	integer	Circle radius, possible values: 1 - 4294967295
callback	function	User callback

tracker.setAlarmGeofence(55.753905, 37.620872, 200, function(err, result){
  if (err) {
    console.log('SET ALARM GEOFENCE ERROR: ', err);
  } else {
    console.log('SET ALARM GEOFENCE: ', result);
  }
});

Under the hood

Command names mapping, message types list & all other stuff related to message processing is located in Message.js file. Original protocol documentation is also included in case you will need deep understanding how Meiligao protocol works.

meiligao

Quickstart

meiligao.Server

Events

connect

disconnect

Methods

listen

meiligao.Tracker

Events

heartbeat

error

packet.in

packet.out

login

message

disconnect

timeout

Methods

disconnect

requestReport

getSnImei

resetConfiguration

rebootGps

setExtendedSettings

setHeartbeatInterval

clearMileage

setPowerDownTimeout

getMemoryReports

setMemoryReportInterval

clearMemoryReports

getAuthorizedPhones

setAuthorizedPhones

getReportTimeInterval

setReportTimeInterval

setReportDistanceInterval

setAlarmSpeeding

setAlarmMovement

setAlarmGeofence

Under the hood

Readme

Keywords

Package Sidebar

Install

Repository

Homepage

DownloadsWeekly Downloads

Version

License

Last publish

Collaborators

Weekly Downloads